CALL US TOLL FREE!
SALES & SERVICE 10AM - 8PM EST
(718) - 687 - 2244
(0 item) - $0.00

You have no items in your shopping cart.



    Warmup Heating Cut And Turn Foil System Under Engineered Wood And Laminate 240V All Sizes

    Warmup Cut And Turn Foil System Under Engineered Wood And Laminate 240V All Sizes

    SKU FOIL 240V
    Voltage 240V
    Product Width View Options
    Thickness 1/16" (0.4mm)
    Output Rating 12 W/sq ft
    Approvals UL & CSA
    Warranty Warmup® 30-year transferable warranty
    Ships in Ships in 1-3 Business days

    All Sizes Available! View Option For Available Sizes. 
    Call The Showroom For Pricing!

    Heating cable spacing: 2" (50mm)

    Cold lead length: 10 ft (3m)

    The NEW Warmup CUT & TURN Foil heating mat is a streamlined electric radiant floor heating system designed for use under laminate, engineered wood and other floating floors. For use under carpet, you can choose the fixed-size Foil heating panels.

    The heating mats can be conveniently installed under the floor finish in both dry and wet areas without the need for additional grounding.

    Features and Benefits:
    Installed directly under floor finish; no self-levelling required
    Grounded flat aluminium foil won’t raise floor levels
    Wire based system can be adapted to fit around objects
    Great for heating under carpets (fixed-size panels) and floating floors such as laminate and engineered wood.
    Approval: UL
    Warmup 15-year transferable warranty
    Warmup Safetynet Installation Guarantee
     
    Step 1 Draw an installation plan showing the placement of the mats, floor sensor, and lead wire(s) to the thermostat. The Warmup Foil heating system should cover at least 80-90% of the floor area of your room to be used as a primary heat source.
     
    Step 2 The Foil heaters may be installed over any subfloor that is approved for carpet or laminate applications, including plywood, backer board and concrete slabs. The Foil heaters CANNOT be installed directly over those surfaces, so a padding or underlayment as provided with your carpet or floating wood floor installation must be laid down first. Carefully inspect the subfloor and make sure it is clean, free of sharp edges, nails and any other materials that may damage the heating system.
     
    Step 3 Unroll the Warmup Foil heating system completely flat and place it on top of the underlayment. Cut & Turn as needed per the instructions to give it the shape you need. Keep the heater at least 10” (25cm) from the edges of the room. When fitting more than one Warmup® foil heating mat in a room, the heating mats must not overlap, as overheating will result. Bring all lead wires back to the thermostat separately.
     
    Step 4 The floor sensor is used for temperature regulation of the floor surface and to prevent the mats to exceed safe levels of heating. Tape the sensor down with tape, positioning it in-between element wires under the heating system. Run the sensor cable back to the thermostat.

    When installing Carpet or Floating floors: With carpet, pay attention to tacking and pulling techniques when stretching the carpet at the edge of the room. Place a protective sleeve such as cardboard under hot iron seams you need to make. These tools have sharp crimps that can damage the heater. When laying laminates, use caution when butting the planks together with a hammer. In general, the Foil heating mats are pretty resistant and you can even steam-clean your carpets over the Foil. Use common sense when using tools and creating traffic during the installation. Connecting your Warmup Foil heating system Bring the lead(s) back to the thermostat and connect according to the manual. When setting up your 3IE thermostat, make sure to select the right flooring surface. This will guarantee your system will never exceed 82 or 84 degrees F depending on your floor choice. Warmup has tested the Foil system with many flooring manufacturers and has worked with them to determine safe operational levels. When installing over a concrete slab, talk to Warmup about heat loss to ensure you get the best results.
    Warranty

    For inquires on the warranty of a product please view the "info" tab or contact us for details.

    Returns

    Make sure to inspect all items upon delivery. Contact us with any questions. For directions on returns, replacements, & cancellations please visit our Shipping & Returns page.

    
    Are You a Professional or Contractor?
    Configure your product
    Warmup Cut And Turn Foil System Under Engineered Wood And Laminate 240V All Sizes

    * Required Fields

    call us for price (718)-987-5300
    Buy the Warmup FOIL 240V at ExoticHomeExpo.com. Research Warmup FOIL 240V online. Find FOIL 240V features and specifications. Get the best deal by comparing the Warmup FOIL 240V today.
    
    Press Esc to close